Specifications

show cfm remote-mep
607
show cfm remote-mep
Displays the configuration of a remote MEP that has been detected by the CC functionality
of CFM, and the status of connection monitoring between the Switch and the remote MEP.
Syntax
show cfm remote-mep [domain-level <Level>] [ma <No.>] [mep <MEPID>] [remote-mep <MEPID>]
[detail]
Input mode
User mode and administrator mode
Parameters
domain-level <Level>
Displays the remote MEP information for the specified domain level.
ma <No.>
Displays the remote MEP information for the specified MA ID number.
mep <MEPID>
Displays the remote MEP information for the specified MEP ID.
remote-mep <MEPID>
Displays information for the specified remote MEP ID.
Operation when a parameter is omitted
This command can display only the information relevant to the condition applied by a
parameter that has been set. If the parameter has not been set, information is
displayed with no condition applied. If multiple parameters are specified, information
conforming to the conditions will be displayed.
detail
The following figure is an example of displaying detailed remote MEP information.
Operation when this parameter is omitted:
Summary information about the remote MEP is displayed.
Operation when all parameters are omitted:
Summary information about all remote MEPs is displayed.
Example 1
The following figure is an example of displaying remote MEP information.
Figure 35-5 Example of displaying remote MEP information
> show cfm remote-mep
Date 2009/10/29 06:05:00 UTC
Total RMEP Counts: 4
Domain Level 3 Name(str): ProviderDomain_3
MA 100 Name(str) : Tokyo_to_Osaka
MEP ID:101 0/20(Up) Enable Status:Timeout
RMEP Information Counts: 2
ID:3 Status:Timeout MAC:0012.e254.dbf1 Time:2009/10/29 05:54:17
ID:15 Status:RDI MAC:00ed.f006.0118 Time:2009/10/29 06:04:15
MA 200 Name(str) : Tokyo_to_Nagoya
MEP ID:8012 CH1 (Up) Enable Status:-
RMEP Information Counts: 2
ID:8003 Status:- MAC:0012.e254.dc20 Time:2009/10/29 06:04:17