Specifications

show cfm
605
Item Meaning Displayed information
Status The status of failure
detection on the MEP
The highest-level failure of the failures
detected by MEP is displayed.
 OtherCCM: Indicates that a CCM was
received from another MA.
 ErrorCCM: Indicates that a CCM that
contains an invalid MEP ID, or a CCM
with an invalid transmission interval, was
received.
 Timeout: Indicates CCM timeout.
 PortState: Indicates that a CCM
reporting a port failure was received.
 RDI: Indicates a CCM reporting failure
detection was received.
-- is displayed if any failure has not been
detected.
MIP Information MIP information --
IF# Port number MIP port number
CH<Channel group#>
Channel group number MIP channel group number
Up The port is in Up status. Indicates that the port is in Up status.
If link aggregation is used, this means that the
channel group is in Up status.
Down The port is in Down
status.
Indicates that the port is in Down status.
If link aggregation is used, this means that the
channel group is in Down status.
Enabled CFM on a port is enabled. --
Disable CFM on a port is
disabled.
--
MAC MIP MAC address - is displayed if the status of the port to which
the MIP belongs is Down.
Example 2
The following figure is an example of displaying the number of entities accommodated in
the CFM configuration.
Figure 35-4 Example of displaying the number of entities accommodated in the CFM
configuration
> show cfm summary
Date 2009/10/28 09:31:36 UTC
DownMEP Counts : 1
UpMEP Counts : 1
MIP Counts : 3
CFM Port Counts : 4
>