Specifications

show cfm
602
show cfm
Displays the configuration information for domains and MPs, and the CFM information
related to detected failures.
Syntax
show cfm [{[domain-level <Level>] [ma <No.>] [mep <MEPID>] | summary}]
Input mode
User mode and administrator mode
Parameters
{[domain-level <Level>] [ma <No.>] [mep <MEPID>] | summary}
domain-level <Level>
Displays CFM information for the specified domain level.
ma <No.>
Displays CFM information for the specified MA ID number.
mep <MEPID>
Displays CFM information for the specified MEP ID.
Operation when a parameter is omitted
Only the CFM information conforming to the specified parameter condition
can be displayed. If the parameter is not specified, the CFM information is
displayed with no condition applied. If multiple parameters are specified, the
CFM information conforming to the conditions will be displayed.
summary
Displays the number of MPs and CFM ports that can be accommodated.
Operation when this parameter is omitted:
All CFM information is displayed.
Example 1
The following figure is an example of displaying the CFM configuration information.
Figure 35-3 Example of displaying the CFM configuration information
> show cfm
Date 2009/10/28 09:31:33 UTC
Domain Level 3 Name(str): ProviderDomain_3
MA 300 Name(str) : Tokyo_to_Osaka
Primary VLAN:300 VLAN:10-20,300
CC:Enable Interval:1min
Alarm Priority:2 Start Time: 2500ms Reset Time:10000ms
MEP Information
ID:8012 UpMEP CH1 (Up) Enable MAC:00ed.f205.0101 Status:-
MA 400 Name(str) : Tokyo_to_Nagoya
Primary VLAN:400 VLAN:30-40,400
CC:Enable Interval:10min
Alarm Priority:0 Start Time: 7500ms Reset Time: 5000ms
MEP Information
ID:8014 DownMEP 0/21(Up) Disable MAC:00ed.f205.0115 Status:-
MIP Information
0/12(Up) Enable MAC:00ed.f205.010c
0/22(Down) Enable MAC:-
Domain Level 4 Name(str): ProviderDomain_4