Specifications

l2ping
597
Figure 35-1 Example of executing the l2ping command
> l2ping remote-mep 1010 domain-level 7 ma 1000 mep 1020 count 3
L2ping to MP:1010(0012.e254.dc01) on Level:7 MA:1000 MEP:1020 VLAN:20
Time:2009/10/28 06:59:50
1: L2ping Reply from 0012.e254.dc01 64bytes Time= 20 ms
2: L2ping Reply from 0012.e254.dc01 64bytes Time= 10 ms
3: L2ping Reply from 0012.e254.dc01 64bytes Time= 10 ms
--- L2ping Statistics ---
Tx L2ping Request : 3 Rx L2ping Reply : 3 Lost Frame : 0%
Round-trip Min/Avg/Max : 10/13/20 ms
>
Display items
Table 35-1 Items displayed for the l2ping command
Item Meaning Displayed information
L2ping to MP:<Remote MP>
The MAC address of the
destination remote MEP or
MI P.
The MAC address of the destination remote MEP
or MIP.
<Remote MAC address>: When the MAC address
of a remote MEP or MIP is specified.
<Remote MEP ID>(<Remote MAC address>):
When a remote MEP ID is specified.
Level Domain level 0 to 7
MA MA ID number Configured MA ID number
MEP MEP ID MEP ID for the Switch
VLAN VLAN ID Source VLAN ID
Time Send time
yyyy/mm/dd hh:mm:ss year/month/day
hour:minute:second
<Count>
Test number Test number
L2ping Reply from
<MAC address>
MAC address of the
replying MP
The MAC address of the remote MEP or MIP that
replied.
bytes Number of received bytes Number of bytes starting from the common CFM
header and ending with End TLV of the CFM PDU
Time Response time The time from the transmission of a loopback
message until a loopback reply is received
Request Timed Out. Reply wait timeout Indicates that no reply was received within the
reply wait time.
Transmission failure. Transmission failure Indicates that a message could not be sent from
the source VLAN.
Tx L2ping Request Number of loopback
messages that were sent
--
Rx L2ping Reply Number of loopback
replies that were received
Number of replies that were received normally
from the remote MEP or MIP