Specifications

clear loop-detection logging
593
clear loop-detection logging
Clears the log information for the received L2 loop detection frames.
Syntax
clear loop-detection logging
Input mode
User mode and administrator mode
Parameters
None
Example
The following figure is an example of clearing t the log information for the received L2 loop
detection frames.
Figure 34-5 Example of clearing the log information for the received L2 loop detection
frames
# clear loop-detection logging
#
Display items
None
Impact on communication
None
Response messages
Table 34-8 List of response messages for the clear loop-detection logging command
Message Description
Can't execute. The command could not be executed. Re-execute the
command.
L2 Loop Detection is not configured. L2 loop detection has not been set, or the functionality has
not been enabled. Check the configuration.
Notes
None