Specifications
show loop-detection logging
592
Item Meaning Displayed information
number
Vlan VLAN ID Displays the VLAN ID when an L2 loop
detection frame was sent.
Uplink Uplink port Indicates that the L2 loop detection frame was
received at the uplink port.
Inactive Port blocked Indicates that a port has been blocked.
Impact on communication
None
Response messages
Table 34-7 List of response messages for the show loop-detection logging command
Message Description
Can't execute. The command could not be executed. Re-execute the
command.
There is no logging data. There is no log data.
L2 Loop Detection is not configured. L2 loop detection has not been set, or the functionality has
not been enabled. Check the configuration.
Notes
Disabling the L2 loop detection functionality clears log information about the received
detection frames.