Specifications

clear loop-detection statistics
589
clear loop-detection statistics
Clears L2 loop detection statistics.
Syntax
clear loop-detection statistics [port <Port# list>] [channel-group-number <Channel group#
list>]
Input mode
User mode and administrator mode
Parameters
port <Port# list>
Clears the L2 loop detection statistics for the specified port number.
For details about how to specify <Port# list> and the specifiable range of values, see
Specifiable values for parameters.
channel-group-number <Channel group# list>
Clears the L2 loop detection statistics for the channel groups specified in list format
in the specified link aggregation.
For details about how to specify <Channel group# list>, see Specifiable values for
parameters.
Note on setting parameters
This command can clear only the information relevant to the condition applied by a
parameter that has been set.
If no parameter is specified, information is cleared without being limited by any
conditions. If multiple parameters are specified, information that meets the
conditions will be displayed.
Operation when all parameters are omitted:
All L2 loop detection statistics are cleared.
Example
Clears L2 loop detection statistics.
Figure 34-3 Example of clearing L2 loop detection statistics
# clear loop-detection statistics
#
Display items
None
Impact on communication
None