Specifications

show loop-detection statistics
586
show loop-detection statistics
Displays L2 loop detection statistics.
Syntax
show loop-detection statistics [port <Port# list>] [channel-group-number <Channel group#
list>]
Input mode
User mode and administrator mode
Parameters
port <Port# list>
Displays L2 loop detection statistics for the specified port number.
For details about how to specify <Port# list> and the specifiable range of values, see
Specifiable values for parameters.
channel-group-number <Channel group# list>
Displays L2 loop detection statistics for the channel groups specified in list format in
the specified link aggregation.
For details about how to specify <Channel group# list>, see Specifiable values for
parameters.
Note on setting parameters
This command can display only the information relevant to the condition applied by a
parameter that has been set.
If the parameter has not been set, information is displayed with no condition applied.
If multiple parameters are specified, information that meets the conditions will be
displayed.
Operation when all parameters are omitted:
All L2 loop detection statistics are displayed.
Example
Displays L2 loop detection statistics.
Figure 34-2 Example of displaying L2 loop detection statistics
> show loop-detection statistics
Date 2008/11/12 16:22:54 UTC
Port:0/1 Down Type :trap
TxFrame : 0 RxFrame : 0
Inactive Count: 0 RxDiscard : 0
Last Inactive : - Last RxFrame : -
Port:0/2 Down Type :trap
TxFrame : 0 RxFrame : 0
Inactive Count: 0 RxDiscard : 0
Last Inactive : - Last RxFrame : -
Port:0/3 Down Type :trap
TxFrame : 0 RxFrame : 0
Inactive Count: 0 RxDiscard : 0
Last Inactive : - Last RxFrame : -
Port:0/4 Down(loop) Type :send-inact
TxFrame : 200 RxFrame : 200
Inactive Count: 1 RxDiscard : 0
Last Inactive : 2008/11/12 16:21:56 Last RxFrame : 2008/11/12 16:21:56