Specifications

show loop-detection
583
0/9 Down trap 0 - -
0/10 Down trap 0 - -
0/17 Down trap 0 - -
0/18 Down trap 0 - -
0/19 Down trap 0 - -
0/20 Down trap 0 - -
0/21 Down trap 0 - -
0/22 Down uplink - - -
0/24 Down trap 0 - -
0/25 Down trap 0 - -
0/26 Down trap 0 - -
ChGr:1 Down(loop) send-inact 200 3569 ChGr:2 1
ChGr:2 Down(loop) send-inact 200 3569 ChGr:1 1
ChGr:5 Down trap 0 - -
ChGr:8 Down uplink - - 0/8 1
>
Display items
Table 34-1 Items displayed for L2 loop detection information
Item Meaning Displayed information
Interval Time Sending interval of L2 loop
detection frames
(in seconds)
--
Output Rate Sending L2 loop detection frames
rate (packets/s)
The current transmission rate for L2 loop
detection frames is displayed.
Threshold Number of detections before a port
is blocked
Displays the setting value for the number of L2
loop detections before a port is blocked.
Hold Time Time the number of detections is
retained (in seconds)
Displays the setting time that the number of L2
loop detections is retained before a port is
blocked. infinity is displayed if this item has
not been set.
#1
Auto Restore Time Automatic restoration time (in
seconds)
Displays the setting time before a blocked port is
activated automatically. -- is displayed if a port is
not automatically restored.
#2
Configuration Number of ports set to send L2 loop
detection frames
Displays the number of VLAN ports
#3
that are set
to send L2 loop detection frames
If this value is larger than the value displayed for
Capacity (the number of ports allowed for
sending L2 loop detection frames), some L2 loop
detection frames could not be sent.
Capacity Number of ports allowed to send
L2 loop detection frames
Number of VLAN ports
#3
that are able to send L2
loop detection frames at the defined transmission
rate
Port Port number or channel
group number
<IF#>: Port number
ChGr:<Channel group#>: Channel group number