Specifications

show storm-control
578
Item Meaning Displayed information
Recover rate Recovery-from-storm
threshold
-- is displayed if this item has not been set.
Filter rate Flow rate limit value Displays the lower threshold.
-- is displayed if a storm-control action filter has not been
set.
Action Operations when a storm is
detected
Inactivate: The applicable port is blocked.
Filter: The flow rate of the received frames has a limit.
Trap: An SNMP trap is issued.
Log: A log message is output.
Filter recovery
time
Monitoring time for canceling
the flow rate limit
-- is displayed if a storm-control action filter has not been
set.
State Storm detection status Forwarding: Forwarding normally
Filtering: The flow rate limit is on.
Inactivate: A port has been blocked by storm detection.
Detecting: A storm has been detected (this status is
displayed when a port is being blocked or when a flow limit
has not been set).
Filter recovery
remaining time
Remaining monitoring time
for canceling the flow rate
limit (in seconds)
-- is displayed if State is not Filtering.
Current rate Current flow rate --
Current filter rate Current status of the flow
rate limit
When State is Filtering: The flow limit value
When State is not Filtering: The storm detection
threshold
Detect count Number of storms that have
been detected
--
Last detect Date and time a storm was
last detected
year/month/day hour:minute:second
-- is displayed when no storms have been detected.
Impact on communication
None
Response messages
Table 33-3 List of response messages for the show storm-control command
Message Description
Can't execute. The command could not be executed. Re-execute the
command.
storm-control is not configured. The storm control functionality has not been configured.
Check the configuration.
Notes
None