Specifications

show storm-control
576
show storm-control
Displays storm control information.
Syntax
show storm-control [port <Port# list>][broadcast][multicast][unicast][detail]
Input mode
User mode and administrator mode
Parameters
port <Port# list>
Displays the storm control information for the specified port.
For details about how to specify <Port# list> and the specifiable range of values, see
Specifiable values for parameters.
Operation when this parameter is omitted:
Storm control information for all ports is displayed.
broadcast
Displays broadcast storm control information.
multicast
Displays multicast storm control information.
unicast
Displays unicast storm control information.
Note on setting parameters
This command can display only the information relevant to the condition applied by a
parameter that has been set. If the parameter has not been set, information is
displayed with no condition applied. If multiple parameters are specified, information
that meets the conditions will be displayed.
detail
Displays detailed information about storm control.
Operation when this parameter is omitted:
Storm control information for all ports is displayed.
Example 1
Figure 33-1 Displaying storm control information
> show storm-control
Date 2009/03/24 10:46:35 UTC
<Broadcast>
Port Detect Recovery Filter State Count Last detect
0/1 200 100 100 Filtering 1 2009/03/24 10:46:25
0/2 200 100 - Forwarding 0 ----/--/-- --:--:--
<Unicast>
Port Detect Recovery Filter State Count Last detect
0/1 10000 5000 5000 Filtering 1 2009/03/24 10:45:52
0/2 10000 5000 - Forwarding 0 ----/--/-- --:--:--
>