Specifications

show wol-authentication user [OP-WOL]
533
show wol-authentication user [OP-WOL]
Displays user information that has been registered in the internal DB for user authentication.
This command can also display user information that is being entered or edited by using
the following commands:

set wol-authentication user command

set wol-authentication password command

set wol-authentication permit command

remove wol-authentication user command
User information is displayed in ascending order of user name.
Syntax
show wol-authentication user { edit | commit } [username <User name>] [detail]
Input mode
Administrator mode
Parameters
{edit | commit}
edit
Displays user information being edited.
commit
Displays operating user information.
username <User name>
The user name.
If the specified character string partly matches the user name that has been
registered, the relevant user information is displayed.
Specify 1 to 128 characters. You can use alphanumeric characters (case sensitive),
at marks (
@), hyphens (-), underscores (_), and periods (.).
Operation when this parameter is omitted:
All user information is displayed.
detail
Displays detailed information about the users who are being edited or operated.
Operation when this parameter is omitted:
Detailed information is not displayed.
Example 1
When displaying the user information being edited:
# show wol-authentication user edit
Date 2008/11/06 20:48:57 UTC
Total user counts: 5
Total device link: 7
No any manual device Username
1 deny deny 2 Mail-Address_of_USER04_of_The_Company...
2 permit permit 1 USER01
* 3 deny permit 3 USER02
4 permit deny 0 USER03