Specifications
set wol-authentication permit [OP-WOL]
529
set wol-authentication permit [OP-WOL]
Changes (adds or deletes) information about the terminals that can be accessed by
registered users.
To apply the setting to user information, execute the
commit wol-authentication
command.
Syntax
set wol-authentication permit <User name> { add [any][manual][device-name <Name>] |del
[any][manual][device-name <Name>] }
Input mode
Administrator mode
Parameters
<User name>
Specify the name of the user whose access permissions for the terminal are to be
changed.
add [any][manual][device-name <Name>]
any
Adds access permissions for all terminals that have been registered in the
internal DB used to register the terminal that sends the startup command.
manual
Adds access permission for a terminal for which a MAC address and VLAN ID
are directly specified.
device-name <Name>
Adds the terminal name that has been registered in the internal DB used to
register the terminal that sends the startup command.
Specify 1 to 128 characters. You can use alphanumeric characters (case
sensitive), at marks (
@), hyphens (-), underscores (_), and periods (.).
Note on setting this parameter
You cannot omit all of the parameters. Specify at least one of the parameters.
del [any][manual][device-name <Name>]
any
Deletes the access permissions for all terminals that have been registered in
the internal DB used to register the terminal that sends the startup command.
manual
Deletes the access permissions for the terminal for which a MAC address and
VLAN ID are directly specified.
device-name <Name>
Deletes the terminal name that has been registered in the internal DB used to
register the terminal that sends the startup command.
Note on setting this parameter
You cannot omit all of the parameters. Specify at least one of the parameters.
Example
Adding user access permissions for a terminal: