Specifications

set wol-authentication password [OP-WOL]
527
set wol-authentication password [OP-WOL]
Changes a user password that has been registered.
To apply the setting to user information, execute the
commit wol-authentication
command.
Syntax
set wol-authentication password <User name> <Old password> <New password>
Input mode
Administrator mode
Parameters
<User name>
Specify the name of the user whose password is to be changed.
<Old Password>
Specify the current password.
<New Password>
Specify the new password.
Specify 1 to 32 characters. You can use alphanumeric characters (case sensitive), at
marks (
@), hyphens (-), underscores (_), and periods (.).
Example
Changing the password for user USER01:
# set wol-authentication password USER01 pass user0101
Display items
None
Impact on communication
None
Response messages
Table 29-15 List of response messages for the set wol-authentication password command
Message Description
The old-password is different. The old password for the specified user is incorrect.
Unknown user '<User name>'.
The specified user has not been registered.
License key is not installed. The Secure Wake-on-LAN software option license key has
not been set.
Notes
 This command can be executed only after the software option license key has been
installed.
 Before execution of the command, user information must be registered by the
set