Specifications

store wol-device [OP-WOL]
521
store wol-device [OP-WOL]
Creates a backup file of the internal DB used to register the terminal that sends the startup
command.
Syntax
store wol-device ramdisk <File name> [-f]
Input mode
Administrator mode
Parameters
ramdisk
Creates on the RAMDISK a backup file of the internal DB used to register the
terminal that sends the startup command.
<File name>
Specify the name of the file to which the internal DB used to register the
terminal that sends the startup command is to be backed up.
Specify the file name with 64 or fewer characters. For the characters that can
be specified, see Specifiable values for parameters.
-f
Creates a backup file of the internal DB used to register the terminal that sends the
startup command without displaying a confirmation message.
Operation when this parameter is omitted:
A confirmation message is displayed.
Example
Create the backup file wol_dev.txt for the internal DB used to register the terminal that
sends the startup command:
# store wol-device ramdisk wol_dev.txt
Backup wol-device name data. Are You sure? (y/n): y
Backup complete.
#
Display items
None
Impact on communication
None
Response messages
Table 29-12 List of response messages for the store wol-device command
Message Description
Backup complete. A backup file has been created successfully.
Store operation failed. The command could not be executed because of
insufficient RAMDISK capacity.