Specifications

show wol-device name [OP-WOL]
515
show wol-device name [OP-WOL]
Displays the terminal information that has been registered in the internal DB used to
register the terminal that sends the startup command. This command can also display user
information that is being entered or edited by using the following commands:

set wol-device name command

set wol-device mac command

set wol-device vlan command

set wol-device ip command

set wol-device alive command

set wol-device description command

remove wol-device name command
Syntax
show wol-device name {edit | commit} [device-name <Name>] [detail]
Input mode
Administrator mode
Parameters
{edit | commit}
edit
Displays the terminal information being edited.
commit
Displays information about the terminals being operated.
device-name <Name>
Specify a terminal name.
If the specified character string partly matches a terminal name that has been
registered, the relevant terminal information is displayed.
Specify 1 to 128 characters. You can use alphanumeric characters (case sensitive),
at marks (
@), hyphens (-), underscores (_), and periods (.).
Operation when this parameter is omitted:
All terminal information is displayed.
detail
Displays detailed information about the terminals that are being edited or operated.
Operation when this parameter is omitted:
Detailed information is not displayed.
Example 1
 Displaying the terminal information being edited:
# show wol-device name edit
Date 2008/11/06 14:48:49 UTC
Total device counts: 5
No Device name MAC VLAN IP address Alive Description