Specifications

set wol-device description [OP-WOL]
512
set wol-device description [OP-WOL]
Changes the supplementary information in the terminal information that has been
registered.
To apply the setting to the terminal information, execute the
commit wol-device
command.
Syntax
set wol-device description <Name> [<Description>]
Input mode
Administrator mode
Parameters
<Name>
Specify the name of the terminal whose supplementary information is to be changed.
<Description>
Enter the new supplementary information.
Specify 1 to 128 characters. You can use alphanumeric characters (case sensitive),
at marks (
@), hyphens (-), underscores (_), and periods (.).
Operation when this parameter is omitted:
The supplementary information is deleted.
Example
Changing the supplementary information for terminal PC01:
# set wol-device description PC01 change-user
Display items
None
Impact on communication
None
Response messages
Table 29-6 List of response messages for the set wol-device description command
Message Description
Unknown device '<Name>'.
The specified terminal name has not been registered.
License key is not installed. The Secure Wake-on-LAN software option license key has
not been set.
Notes
 This command can be executed only after the software option license key has been
installed.
 Before execution of this command, terminal information must be registered by the
set wol-device name command.