Specifications

set wol-device alive [OP-WOL]
510
set wol-device alive [OP-WOL]
Changes the method for verifying terminal activation in the information that has been
registered.
To apply the setting to the terminal information, execute the
commit wol-device
command.
Syntax
set wol-device alive <Name> {check [timeout <Seconds>] | nocheck}
Input mode
Administrator mode
Parameters
<Name>
Specify the name of the terminal whose setting for activation verification method is to
be changed.
check [timeout <Seconds>]
Verifies that the terminal is still activated.
timeout <Seconds>
Sets the interval for verifying terminal activation. Specify an interval from 60 to
600 seconds.
Operation when this parameter is omitted:
The verification interval is set to 120 seconds.
nocheck
Sets that verification of terminal activation is not performed.
Example
Changing the interval for verifying activation of terminal PC01:
# set wol-device alive PC01 check timeout 300
Display items
None
Impact on communication
None
Response messages
Table 29-5 List of response messages for the set wol-device alive command
Message Description
Unknown device '<Name>'.
The specified terminal name has not been registered.
License key is not installed. The Secure Wake-on-LAN software option license key has
not been set.