Specifications

set wol-device ip [OP-WOL]
508
set wol-device ip [OP-WOL]
Changes the IP address and method used to identify the IP address in the terminal
information that has been registered.
To apply the setting to the terminal information, execute the
commit wol-device
command.
Syntax
set wol-device ip <Name> {<IP address> | dhcp}
Input mode
Administrator mode
Parameters
<Name>
Specify the name of the terminal whose IP address information is to be changed.
{<IP address> | dhcp}
<IP address>
Directly specify the IP address of the terminal in a static IP address
environment.
Specify the IP address in the range from
1.0.0.0 to 126.255.255.255 or
from
128.0.0.0 to 223.255.255.255.
dhcp
In a DHCP environment, an IP address is set in conjunction with DHCP
snooping.
Example
Changing the IP address for terminal PC01:
# set wol-device ip PC01 202.68.133.72
Display items
None
Impact on communication
None
Response messages
Table 29-4 List of response messages for the set wol-device ip command
Message Description
Unknown device '<Name>'.
The specified terminal name has not been registered.
License key is not installed. The Secure Wake-on-LAN software option license key has
not been set.
Notes
 This command can be executed only after the software option license key has been
installed.