Specifications

set wol-device vlan [OP-WOL]
507
set wol-device vlan [OP-WOL]
Changes the VLAN ID in the terminal information that has been registered.
To apply the setting to the terminal information, execute the
commit wol-device
command.
Syntax
set wol-device vlan <Name> <VLAN ID>
Input mode
Administrator mode
Parameters
<Name>
Specify the name of the terminal whose VLAN ID is to be changed.
<VLAN ID>
Changes the VLAN ID of the VLAN to which the terminal will belong. For details
about the specifiable range of values, see Specifiable values for parameters
Example
Changing the VLAN ID for terminal PC01:
# set wol-device vlan PC01 4094
Display items
None
Impact on communication
None
Response messages
Table 29-3 List of response messages for the set wol-device vlan command
Message Description
Unknown device '<Name>'.
The specified terminal name has not been registered.
License key is not installed. The Secure Wake-on-LAN software option license key has
not been set.
Notes
 This command can be executed only after the software option license key has been
installed.
 Before execution of this command, terminal information must be registered by the
set wol-device name command.