Specifications

set wol-device mac [OP-WOL]
506
set wol-device mac [OP-WOL]
Changes the MAC address of the terminal information that has been registered.
To apply the setting to the terminal information, execute the
commit wol-device
command.
Syntax
set wol-device mac <Name> <MAC>
Input mode
Administrator mode
Parameters
<Name>
Specify the name of the terminal whose MAC address is to be changed.
<MAC>
Specify a new MAC address.
Specify the MAC address in the range from
0000.0000.0000 to feff.ffff.ffff.
Note that you cannot specify a multicast MAC address (address in which the lowest
bit of the first byte is 1).
Example
Changing the MAC address for terminal PC01:
# set wol-device mac PC01 0012.ee86.6fd4
Display items
None
Impact on communication
None
Response messages
Table 29-2 List of response messages for the set wol-device mac command
Message Description
Unknown device '<Name>'.
The specified terminal name has not been registered.
License key is not installed. The Secure Wake-on-LAN software option license key has
not been set.
Notes
 This command can be executed only after the software option license key has been
installed.
 Before execution of this command, terminal information must be registered by the
set wol-device name command.