Specifications

set wol-device name [OP-WOL]
505
description
<Description>
Sets supplementary information about the terminal.
Specify 1 to 128 characters. You can use alphanumeric characters (case sensitive),
at marks (
@), hyphens (-), underscores (_), and periods (.).
Operation when this parameter is omitted:
No supplementary information is provided.
Example
Registering a new terminal PC01:
# set wol-device name PC01 1234.5678.9abc 1000 ip 192.168.100.100 alive check
timeout 600 description [e-mail]
Display items
None
Impact on communication
None
Response messages
Table 29-1 List of response messages for the set wol-device name command
Message Description
Already device '<Name>' exists.
The specified terminal has already been registered.
The number of devices exceeds 300. The number of terminals to be registered exceeds 300.
License key is not installed. The Secure Wake-on-LAN software option license key has
not been set.
Notes
 This command can be executed only after the software option license key has been
installed.
 To check the registered terminal information, execute the
show wol-device name
command.
 The maximum number of terminals that can be registered is 300.
 If the
alive nocheck parameter is specified, the address information specified for
the
ip parameter is invalid.
 This command can be applied to a new terminal. To change the setting, use another
set wol-device command.