Specifications

show authentication multi-step
500
show authentication multi-step
Displays the information for authenticated terminals on a multistep authentication port for
an interface.
Syntax
show authentication multi-step [port <IF#>] [mac <MAC>]
Input mode
Administrator mode
Parameters
port <IF#>
Specify the number of the interface for which you want to display the multistep
authentication progress.
Operation when this parameter is omitted:
The progress of multistep authentication is displayed for all MAC addresses.
mac <MAC>
Specify the MAC address for which you want to display multistep authentication
progress.
Operation when this parameter is omitted:
The progress of multistep authentication is displayed for all MAC addresses.
Example
Figure 28-1 Displaying the progress of multistep authentication
# show authentication multi-step
Date 2009/10/29 06:58:27 UTC
Port 0/1 : multi-step dot1x
< Supplicant information > <Authentic method>
No MAC address State VLAN F Type Last (first step)
1 000d.0b3a.e977 pass 100 multi web (dot1x)
Port 0/5 : multi-step
< Supplicant information > <Authentic method>
No MAC address State VLAN F Type Last (first step)
1 0013.20a5.24ab pass 10 * single mac (-)
Port 0/22 : multi-step permissive
< Supplicant information > <Authentic method>
No MAC address State VLAN F Type Last (first step)
1 000b.972f.e22b pass 100 single dot1x (-)
#