Specifications

store mac-authentication
495
Response messages
Table 27-25 List of response messages for the store mac-authentication command
Message Description
Backup complete. A backup file has been created successfully.
Store operation failed. The command could not be executed because of
insufficient RAMDISK capacity.
Command information was damaged. A backup file could not be created because the
authentication information was corrupted.
Data doesn't exist. A backup file could not be created. A commit operation
might not have been executed. Execute a commit
operation, and then check the result.
If the commit operation fails again, the internal flash
memory might be corrupted.
MAC-Authentication is not configured. The MAC-based authentication functionality is not
configured. Check the configuration.
Notes
 If the internal MAC-based authentication DB is backed up when the RAMDISK
capacity is insufficient, incomplete backup files might be created.
When creating backup files, use the
show ramdisk command to make sure there is
enough free capacity on the RAMDISK.
The following is an example of executing the
show ramdisk command:
> show ramdisk
Date 2008/11/13 15:13:04 UTC
used 68,608 byte
free 6,182,912 byte
total 6,251,520 byte
>
Note: The underlined part (the value for free indicating the free capacity of the user
area) must be at least 200kB.
 If the free capacity on the RAMDISK is insufficient, use the
del command to delete
unnecessary files before creating the backup files.