Specifications

set mac-authentication mac-address
487
 Adding ffff.ffff.ffff as the MAC mask:
# set mac-authentication mac-address 0000.0000.0000 ffff.ffff.ffff 1
Display items
None
Impact on communication
None
Response messages
Table 27-20 List of response messages for the set mac-authentication mac-address
command
Message Description
Already mac address xxxx.xxxx.xxxx,dddd exists. The specified MAC address has already been registered.
xxxx.xxxx.xxxx: MAC address
dddd: VLAN ID (If 0 is displayed, no VLAN ID is set.)
Already mac address
xxxx.xxxx.xxxx(nnnn.nnnn.nnnn),dddd exists.
The specified MAC address has already been registered.
xxxx.xxxx.xxxx: MAC address
nnnn.nnnn.nnnn: MAC mask
dddd: VLAN ID (If 0 is displayed, no VLAN ID is set.)
The number of client exceeds limits. A MAC address could not be added because the number of
entries exceeded the maximum number of entries allowed
for the internal MAC-based authentication DB.
MAC-Authentication is not configured. The MAC-based authentication functionality is not
configured. Check the configuration.
Notes
 This command cannot be used concurrently by multiple users.
 The setting is applied to the internal MAC-based authentication DB only when the
commit mac-authentication command is executed.
 You can register a MAC address that has already been registered if its MAC mask or
VLAN ID is different from the registered MAC address.