Specifications

show mac-authentication
482
Y: Applicable
N: Not applicable (
-- is also displayed on the screen)
#1: For details about the conditions for enabling the operating status, see 11.1.2
Configuration procedure for MAC-based authentication in the Configuration Guide Vol. 2.
#2: Legacy mode is not supported.
#3: VLAN IDs registered by automatic VLAN allocation are not displayed.
However, VLAN IDs are displayed if they are accommodated in the native VLAN (fixed) as
the result of automatic VLAN allocation.
#4: When the
authentication force-authorized enable command is enabled and the
authentication force-authorized vlan command is not set, native vlan is displayed.
Impact on communication
None
Response messages
Table 27-16 List of response messages for the show mac-authentication command
Message Description
MAC-Authentication is not configured. The MAC-based authentication functionality is not
configured. Check the configuration.
Notes
None