Specifications

show mac-authentication
481
Item Meaning Displayed information Mode
D L F
[Syslog send] syslog Setting status of syslog information output
Enable: Enabled
Disable: Disabled
Y Y
[Traps] Traps SNMP trap setting status
Disable is displayed if SNMP traps are disabled.
Y Y
Port Count Total number of
ports
Number of ports for which MAC-based
authentication is enabled
Y Y
Port Port information Port number (Legacy is displayed after a port
number if legacy mode is used.)
Y Y Y
VLAN ID VLAN
information
VLAN ID
#3
registered in MAC-based
authentication.
-- is displayed if this item has not been set.
Y Y Y
Forceauth VLAN Forced
authentication
Setting status of forced authentication in dynamic
VLAN mode
#4
or legacy mode
xxxx: Enabled.
xxxx indicates the VLAN ID set in configuration.
VLAN unmatch: Invalid due to an insufficient
setting
Disable: Disabled (default)
Y Y N
Setting status of forced authentication in fixed
VLAN mode
Enable: Enabled
Disable: Disabled
N N Y
Access-list-No Access Lists Setting status of authentication IP access-group
Disable is displayed if this item is not set.
Y N Y
Arp relay ARP relay Setting status of authentication arp-relay
Enable: Enabled
Disable: Disabled
Y N Y
Max-user Maximum
number of
authenticated
terminals
The maximum number of authentication terminals
for each port
Y Y Y
Authentication
method
Authentication
list name for the
port-based
authentication
method
Displays the name of the authentication method list
registered for each port.
 (Not defined) is displayed after the
authentication method list name if the set
authentication method list name is invalid.
 This item is not displayed if it is not set.
Y N Y
Legend:
D: Dynamic VLAN mode
L: Legacy mode
F: Fixed VLAN mode