Specifications

trace-monitor
29
trace-monitor
Specifies whether to display the operation log on the monitor. When this command is
entered with the
enable parameter specified, the operation log is displayed on the console
whenever necessary each time an event occurs.
Syntax
trace-monitor {enable | disable} [save]
Input mode
User mode and administrator mode
Parameters
{ enable | disable }
enable
The operation log is displayed on the monitor.
disable
The operation log is not displayed on the monitor.
Operation when this parameter is omitted:
This parameter cannot be omitted.
save
The new setting is saved to the internal flash memory.
Operation when this parameter is omitted:
The new setting is not saved to the internal flash memory. If you restart the
device, the old monitor display setting is used.
Operation when this command is not used:
The operation log is displayed on the monitor.
Example
 Do not display the operation log on the monitor, or save the setting.
> trace-monitor disable Press the Enter key.
 Display the operation log on the monitor, and save the setting.
> trace-monitor enable save Press the Enter key.
Display items
None
Impact on communication
None
Response messages
None
Notes
 Executing the show running-config command does not display this command
setting. Executing the
show system command will display the saved setting in the