Specifications

show mac-authentication auth-state select-option
451
show mac-authentication auth-state select-option
Extracts specified items from the information about the currently authenticated terminals
(MAC address) and displays them in ascending order by authentication date and time.
Note that if you execute the command with the
detail option specified, entries in the
process of authentication and entries for which authentication processing has been
suspended are also displayed as extracted entries.
Syntax
show mac-authentication auth-state select-option [mode {dynamic | static}]
[port <Port# list>] [vlan <VLAN ID list>] [mac <MAC>] [type force] [detail]
Input mode
Administrator mode
Parameters
When this command is executed, at least one parameter must be specified. Specify at least
one of the parameters.
mode {dynamic | static}
dynamic
Displays information about terminals that have been authenticated in
MAC-based authentication dynamic VLAN mode.
static
Displays information about terminals that have been authenticated in
MAC-based authentication fixed VLAN mode.
Operation when this parameter is omitted:
Information about terminals authenticated in both dynamic VLAN mode and
fixed VLAN mode is displayed.
port <Port# list>
Displays information about authenticated terminals for the specified port number.
For details about how to specify <Port# list> and the specifiable range of values, see
Specifiable values for parameters.
vlan <VLAN-ID-list>
Displays information about authenticated terminals for the specified VLAN ID. For
details about how to specify <VLAN ID list>, see Specifiable values for parameters.
mac <MAC>
Displays information about authenticated terminals for the specified MAC address.
type force
Displays information about terminals that have been authenticated by forced
authentication.
detail
Displays detailed information, including information about terminals that have been
authenticated, terminals in the process of being authenticated, and terminals for
which authentication processing has been suspended due to authentication failure.
Example 1
Figure 27-2 Displaying information about authenticated terminals for the specified port
# show mac-authentication auth-state select-option port 0/20