Specifications

ftp

3. A local directory on the Switch can be moved only to /ramdisk.

4. A local file on the Switch can be sent to or received from

/ramdisk only.

5. If the default file transfer format is ASCII, you will need to execute the

binary

command to enable the transfer of binary files.

6. If you press Ctrl+C while a file is being transferred with a

get or put command, the

file transfer is immediately interrupted. The interruption is reported to the remote

operation terminal and a response is waited for. Therefore, if some communication

failures occur between the Switch and the remote operation terminal, you might not

see any

ftp prompts even if you press Ctrl+C. In this case, press Ctrl+C again.