Specifications

load web-authentication
422
Response messages
Table 26-27 List of response messages for the load web-authentication command
Message Description
Restore complete. Restoration from the backup file was successful.
File format error. The format of the specified backup file is different from the
internal Web authentication DB.
Load operation failed. Restoration from the backup file failed.
Flash memory write failed. Writing of the information to internal flash memory failed.
Web-Authentication is not configured. The Web authentication functionality is not enabled. Check
the configuration.
Notes
1. Note that information registered or changed by using the following commands will be
replaced by the information that is being restored:
set web-authentication user
set web-authentication passwd
set web-authentication vlan
remove web-authentication user
commit web-authentication
2. If restore information has been saved to a PC, transfer the information to the
RAMDISK via FTP. If the restore information has been saved on the memory card,
use the
copy operation command to copy it to the RAMDISK. After either operation,
execute the
load web-authentication command. It is not possible to restore the
files on a PC or the memory card directly.