Specifications

show web-authentication logging
396
No. Log ID Log type Message text
Authentication
mode
Description
Added info
Legacy
Dynamic VLAN
Fixed VLAN
Authentication failed because an attempt to communicate with the RADIUS
server failed.
[Action] Check whether communication is possible between the Switch and the
RADIUS server. After the Switch is able to communicate with the RADIUS
server, log in again.
MAC, USER, IP, PORT or CHGR, VLAN
#1
25 NOTICE LOGIN
Login failed ; Double login. (L2MacManager)
Legacy
Dynamic VLAN
Fixed VLAN
Authentication failed because a notification that could not be authenticated by
the VLAN functionality was received. The cause is either of the following:
 The terminal for which Web authentication was performed had already
been authenticated by IEEE 802.1X authentication.
 The MAC address for the terminal to be authenticated had already been
registered by the mac-address configuration command.
[Action] Use another terminal to log in.
MAC, USER, VLAN
#2
26 NORMA
L
LOGOUT
Force logout ; VLAN deleted.
Legacy
Dynamic VLAN
Fixed VLAN
 Legacy mode
The MAC address of the user logged in to the VLAN was deleted because
the VLAN set for the interface was deleted, or the VLAN mode was
changed.
 Dynamic VLAN mode
The MAC address of the user logged in to the VLAN was deleted because
the VLAN set in the configuration was deleted.
 Fixed VLAN mode
The MAC address of the user logged in to the VLAN was deleted because
the VLAN set for the interface was deleted.
[Action] Configure the VLAN again.
MAC, USER, IP, PORT or CHGR, VLAN
#2
28 NORMA
L
LOGOUT
Force logout ; Polling time out.
Fixed VLAN Authentication was canceled because disconnection of an authenticated
terminal was detected.
[Action] None