Specifications

show web-authentication login
380
Item Meaning Displayed information
# Entry number The entry number for an authenticated, currently logged-in
user.
This is just the displayed number, which changes depending
on such factors as the filter conditions.
F Forced authentication
indication
*: Indicates a user logged in by using the forced
authentication functionality.
When the authentication time is updated, a displayed
asterisk (*) disappears if a request is sent to the RADIUS
server and the RADIUS server accepts the request.
User name user name The name of the authenticated, currently logged-in user.
Up to 32 characters are displayed.
(If the name exceeds 32 characters, part of the name is
replaced with three periods (...).)
If the authentication method by user ID is enabled, the user
name is displayed without
@authentication-method-list-name.
If the user is being switched by the user switching option
functionality, the user name before the switch is displayed.
Port Port number or channel
group number
The port number or channel group number at the time the
authenticated, currently logged-in user logged in (legacy
mode only)
VLAN VLAN The VLAN ID of the VLAN that is accommodating the
authenticated, currently logged-in user
Login time Login date and time The first time the authenticated, currently logged-in user
logged in
year/month/day hour:minute:second
Limit Remaining login time
The remaining login time (hours:minutes:seconds) for the
currently logged-in user.
When a user is logged in, the remaining time might be
displayed as 00:00:00 immediately before the user is
logged out due to a timeout.
When the maximum connection time is set to unlimited:
infinity
Impact on communication
None
Response messages
Table 26-8 List of response messages for the show web-authentication login command
Message Description
There is no information. ( web-auth login user ) Information for a Web authentication login user was not
found.
Web-Authentication is not configured. The Web authentication functionality is not enabled. Check
the configuration.