Specifications

show dot1x logging
362
39 NOTICE LOGIN
Login failed. ; Failed to assign VLAN. (Reason: The VLAN
ID is out of range.)
Port-based
authentication (dynamic)
VLAN-based
authentication (dynamic)
VLAN dynamic assignment failed because the VLAN ID was not in the
normal range.
[Action] Check the range of the VLAN IDs set for the
Tunnel-Private-Group-ID attribute in the Accept packet to be sent by the
RADIUS server.
MAC, PORT or CHGR, VLAN ID
#
40 NOTICE LOGIN
Login failed. ; Failed to assign VLAN. (Reason: The Port
doesn't belong to VLAN.)
Port-based
authentication (dynamic)
VLAN-based
authentication (dynamic)
VLAN dynamic assignment failed because the authentication port did not
belong to the VLAN ID.
[Action] Make sure the VLAN ID set for the Tunnel-Private-Group-ID attribute
in the Accept packet to be sent by the RADIUS server is included in the VLAN
IDs set for the authentication port by the switchport mac vlan
configuration command.
MAC, PORT or CHGR, VLAN ID
#
41 NOTICE LOGIN
Login failed. ; Failed to assign VLAN. (Reason: The VLAN
ID is not set to radius-vlan.)
VLAN-based
authentication (dynamic)
VLAN dynamic assignment failed because the VLAN ID was not subject to
VLAN-based authentication (dynamic).
[Action] Make sure the VLAN ID set for the Tunnel-Private-Group-ID attribute
in the Accept packet to be sent by the RADIUS server is included in the VLAN
IDs set by the dot1x vlan dynamic radius-vlan configuration
command.
MAC, PORT or CHGR, VLAN ID
#
42 NOTICE LOGIN
Login failed. ; Failed to assign VLAN. (Reason: The VLAN
status is disabled.)
Port-based
authentication (static)
Port-based
authentication (dynamic)
VLAN-based
authentication (dynamic)
VLAN dynamic assignment failed because the VLAN was disabled.
[Action] Execute the state configuration command to set the status of the
VLAN to be assigned to active.
MAC, PORT or CHGR, VLAN ID
#
43 NOTICE LOGIN Login failed. ; The number of supplicants on the switch is full.
Port-based
authentication (static)
Port-based
authentication (dynamic)
VLAN-based
authentication (dynamic)
Authentication was not available because there were too many supplicants
for the Switch.
[Action] Attempt authentication again when the total number of authenticated
supplicants is below the capacity limit.
MAC, PORT or CHGR, VLAN ID
#