Specifications

show dot1x logging
359
authentication (dynamic)
VLAN-based
authentication (dynamic)
MAC, PORT or CHGR, VLAN ID
#
11 NORMAL LOGOUT Force logout. ; "clear dot1x auth-state" command succeeded.
Port-based
authentication (static)
Port-based
authentication (dynamic)
VLAN-based
authentication (dynamic)
Authentication has been canceled by a command.
[Action] None
MAC, PORT or CHGR, VLAN ID
#
12 NORMAL LOGOUT Force logout. ; The supplicant was cleared, because it was registered to
MAC VLAN with the configuration.
Port-based
authentication (dynamic)
VLAN-based
authentication (dynamic)
An attempt to authenticate the relevant suppliant was canceled because a
MAC address was configured for the MAC VLAN.
[Action] None
MAC, PORT or CHGR, VLAN ID
#
13 NORMAL LOGOUT Force logout. ; The supplicant was cleared, because it was registered to
mac-address-table with the configuration.
Port-based
authentication (static)
Port-based
authentication (dynamic)
VLAN-based
authentication (dynamic)
An attempt to authenticate the relevant suppliant was canceled because a
MAC address was configured for mac-address-table.
[Action] None
MAC, PORT or CHGR, VLAN ID
#
14 NORMAL LOGOUT Force logout. ; The status of port was changed to Unauthorized, because
another supplicant was detection in single mode.
Port-based
authentication (static)
Port-based
authentication (dynamic)
The authentication status has been changed to Unauthorized because
multiple supplicants were detected on a single-mode port.
[Action] None
MAC, PORT or CHGR, VLAN ID
#
15 NORMAL LOGOUT Force logout. ; Dot1x configuration deleted.
Port-based
authentication (static)
Port-based
authentication (dynamic)
VLAN-based
authentication (dynamic)
Authentication has been canceled because the IEEE 802.1X authentication
configuration was deleted.
[Action] If you want to use IEEE 802.1X authentication, configure it.
MAC, PORT or CHGR, VLAN ID
#
16 NORMAL LOGOUT Force logout. ; Port link down.