Specifications

reauthenticate dot1x
355
Display items
None
Impact on communication
When re-authentication is initiated, no problems with communication arise if
re-authentication is successful. If re-authentication fails, however, communication will be
lost.
Response messages
Table 25-7 List of response messages for the reauthenticate dot1x command
Message Description
Can't execute. The command could not be executed. Re-execute the command.
Dot1x doesn't seem to be
running.
The IEEE 802.1X setting has not been enabled. Check the configuration.
No operational Channel
Group.
There are no available channel groups. Check the authentication mode set by
the configuration.
No operational Port. There are no available ports. Check the authentication mode set by the
configuration.
No operational
VLAN(Dynamic).
VLAN-based authentication (dynamic) was not configured. Check the
authentication mode set by the configuration.
No authenticated user. The specified unit of authentication exists, but there is no authenticated user
registered.
Notes
None