Specifications

set exec-timeout
16
set exec-timeout
Sets the idle time (in minutes) for auto-logout (see 4.3 (3) Auto-logout in the Configuration
Guide Vol. 1).
Syntax
set exec-timeout <Minutes> [save]
Input mode
User mode and administrator mode
Parameters
<Minutes>
Specifies the time for auto-logout in minutes.
Specifiable values
0-60 (If 0 is specified, auto logout is not performed.)
save
Saves the setting of the auto-logout time to the internal flash memory.
Operation when this parameter is omitted:
The new setting is not saved to the internal flash memory. If you either log out
from or restart the device, the old auto-logout time setting is used.
Operation when this command is not used:
The auto-logout time is set to 30 minutes.
Example
 Set the auto-logout value to 10 minutes, and then save the setting.
> set exec-timeout 10 save Press the Enter key.
Display items
None
Impact on communication
None
Response messages
None
Notes
 When the set terminal pager command has been executed with the enable
parameter specified, if "
Press any key to continue (Q to quit)" is displayed and
the display halts temporarily, you will be returned to the prompt after the set time
elapses and thereafter be logged out from the device.
 The following shows the objects that are the target of the auto-logout functionality.