Specifications

show authentication logging
336
Display items
The following shows the display format of a message. (Example: Web authentication)
(1) Log functionality type: Indicates the type of authentication functionality. (Fixed at
AUT.)
(2) Date and time: Indicates the date and time (month
/date hour:minute:second)
an event occurred.
(3) Authentication ID: Indicates the type of Layer 2 authentication.
-
1X: IEEE 802.1X
-
Web: Web authentication
-
MAC: MAC-based authentication
For the meaning of (4), (5), (6), (7), and (8) in the example message, see the
following:
IEEE 802.1X:command
Web authentication:
show web-authentication logging command
MAC-based authentication:
show mac-authentication logging command
Impact on communication
None
Response messages
Table 24-4 List of response messages for the show authentication logging command
Message Description
Can't execute. The command could not be executed. Re-execute the
command.
There is no logging data. There is no log data.
There is no log data to match. Log data matching the specified character string could not
be found.
There is no memory. There is not enough memory to collect data.
Notes
If you execute this command with the search parameter set and if information that matches
the specified character string exists, the number of matched operation log messages is
displayed at the end.
Example: 3 events matched.