Specifications

show qos queueing
328
HOL1= 0, HOL2= 0, Tail_drop= 0
>
Display items
Table 23-4 Display items of statistics
Item Displayed information
Detailed information Meaning
Interface
information
Port<IF#> (outbound)
Port send queues
To-CPU (outbound) Send queues for traffic from the ports to the CPU
SW (outbound) Send queues for traffic among internal LSIs
(This item is displayed only for the
AX1240S-48T2C.)
QoS
information
Status Operating status of the port
 Active: Normal operation.
 Inactive (The port is half
duplex.): Unable to operate normally
(The port is half duplex.)
 Inactive (The shaping rate
exceeds it.): Unable to operate
normally (The shaping rate exceeds the
line speed.)
 Inactive (Two or more causes
exist.): Unable to operate
normally.(There are multiple causes.)
Max_Queue=<No.>
Number of send queues
Rate_limit=<Rate>
Bandwidth set for the port
 When auto-negotiation is unresolved
(including when processing is in progress):
-- is displayed.
 When auto-negotiation has been resolved
or the port bandwidth control is specified for
the specified speed: The specified
bandwidth is displayed.
 When auto-negotiation has been resolved
or the port bandwidth control is not
specified for the specified speed: The line
speed is displayed.
Qmode=<schedule_name>/<drop_name>
Scheduling (pq, wrr, wfq, 2pq+6drr) / drop
control mode (tail_drop)
For details about the scheduling, see the
qos-queue-list configuration command in
20. QoS in the manual Configuration Command
Reference.
Queue
information
Queue<No.>
Send queue number
Qlen=<length>
Number of packet buffers used by the send