Specifications

show qos queueing
326
show qos queueing
Displays information about the send queue of the port.
The send queue length, the maximum queue length, and the number of packets discarded
without being accumulated in the send queue are displayed to enable monitoring of the
traffic status.
Syntax
show qos queueing [<IF#>]
show qos queueing [interface gigabitethernet <IF#>] [AX2200S]
show qos queueing [interface {fastethernet <IF#> | gigabitethernet <IF#>}] [AX1250S]
[AX1240S]
Input mode
User mode and administrator mode
Parameters
<IF#>
interface gigabitethernet <IF#> [AX2200S]
interface {fastethernet <IF#> | gigabitethernet <IF#>} [AX1250S][AX1240S]
<IF#>
Displays information about the send queue of the specified port. For the
specifiable range of <IF#> values, see Specifiable values for parameters.
Operation when this parameter is omitted:
Displays information about the send queues of all ports implemented on the
device, the send queues for traffic from the ports to the CPU, and the send
queues for traffic among the internal LSIs (for the AX1240S-48T2C only).
Example
Figure 23-4 Result of displaying information about all send queues
> show qos queueing
Date 2008/10/23 09:51:07 UTC
To-CPU (outbound)
Max_Queue=8
Queue 1: Qlen= 0, Limit_Qlen= 64
Queue 2: Qlen= 0, Limit_Qlen= 64
Queue 3: Qlen= 0, Limit_Qlen= 64
Queue 4: Qlen= 0, Limit_Qlen= 64
Queue 5: Qlen= 0, Limit_Qlen= 64
Queue 6: Qlen= 0, Limit_Qlen= 64
Queue 7: Qlen= 0, Limit_Qlen= 64
Queue 8: Qlen= 0, Limit_Qlen= 256
discard packets
HOL1= 0, HOL2= 0, Tail_drop= 0
SW (outbound)
Max_Queue=32
Queue 1: Qlen= 0, Limit_Qlen= 32
Queue 2: Qlen= 0, Limit_Qlen= 32
Queue 3: Qlen= 0, Limit_Qlen= 32
Queue 4: Qlen= 0, Limit_Qlen= 32
Queue 5: Qlen= 0, Limit_Qlen= 32
Queue 6: Qlen= 0, Limit_Qlen= 32