Specifications

clear qos-flow
325
clear qos-flow
Clears the number of packets (indicated by matched packets) that met the flow detection
conditions in the QoS flow list, which is displayed by the
show qos-flow command.
Syntax
clear qos-flow
Input mode
User mode and administrator mode
Parameters
None
Example
Figure 23-3 Result of clearing information
> clear qos-flow
>
Display items
None
Impact on communication
None
Response messages
Table 23-3 List of response messages for the clear qos-flow command
Message Description
Can't execute. The command could not be executed. Re-execute the
command.
No configuration. No QoS flow group was set for the Ethernet interface or
VLAN interface. Make sure the QoS flow group setting is
correct, and then try again.
Notes
None