Specifications

show qos-flow
322
show qos-flow
Displays the flow detection conditions and operations to be performed in the QoS flow list
applied on the Ethernet interface or VLAN interface by the QoS flow group command (
ip
qos-flow-group and mac qos-flow-group), and the number of packets that meet the flow
detection conditions.
Syntax
show qos-flow [{<IF#> | interface vlan <VLAN ID>} [<QoS ID>]]
show qos-flow [interface {gigabitethernet <IF#> | vlan <VLAN ID>}[<QoS ID>]] [AX2200S]
show qos-flow [interface {fastethernet <IF#> | gigabitethernet <IF#> | vlan <VLAN
ID>}[<QoS ID>]] [AX1250S] [AX1240S]
Input mode
User mode and administrator mode
Parameters
{<IF#> | interface vlan <VLAN ID>} [<QoS ID>]
interface {gigabitethernet <IF#> | vlan <VLAN ID>}[<QoS ID>] [AX2200S]
interface {fastethernet <IF#> | gigabitethernet <IF#> | vlan <VLAN ID>}[<QoS
ID>
] [AX1250S][AX1240S]
<IF#>
Displays statistics for the specified Ethernet interface. For the specifiable
range of <IF#> values, see Specifiable values for parameters.
intereface vlan <VLAN ID>
vlan <VLAN ID>
Displays statistics for the specified VLAN interface.
For <VLAN ID>, specify the VLAN ID set by the
interface vlan command.
<QoS ID>
<QoS ID>:QoS flow list name
Displays statistics for the specified QoS flow list of the specified interface.
Operation when this parameter is omitted:
Displays statistics for all QoS flow lists applied to the specified interface.
Operation when all parameters are omitted:
Displays statistics for all interfaces.
Example
 The following shows an example of displaying QoS flow list information.
Figure 23-1 Result of displaying MAC QoS flow list information
> show qos-flow 0/1 "apple-talk-qos"
Date 2008/09/18 18:51:40 UTC
Using Port: interface fastethernet 0/1 in
MAC qos-flow-list: apple-talk-qos
remark "cos 5"
10 qos any any appletalk action cos 5
matched packets : 0
>