Specifications

1 Reading the Manual
6
# Model Interface type Range of values
2 AX1240S-48T2C fastethernet 0/1 to 0/48
gigabitethernet 0/49 to 0/50
How to specify <IF# list> <Port# list> and the range of the specifiable values
If <IF# list> <Port# list> is written in parameter input format, use a hyphen (-) or commas
(
,) in the <IF#> format to specify multiple ports. You can also specify one port, as when
<IF#> is written as the parameter input format. The range of specifiable values is the same
as the range of <IF#> values in the above table.
Example of a range specification that uses a hyphen (
-) and commas (,):
0/1-3,0/5
How to specify <VLAN ID list>
If <VLAN ID list> is written in parameter input format, use a hyphen (-) or commas (,) to
specify multiple VLAN IDs. You can also specify one VLAN ID, as when <VLAN ID> is
written as the parameter input format. The range of permitted values is VLAN ID=1 (VLAN
ID for the default VLAN) and other VLAN IDs set by the configuration command.
Example of a range specification that uses a hyphen (
-) and commas (,):
1-3,5,10
How to specify <Channel group# list>
If <Channel group# list> is written in parameter input format, use a hyphen (-) or commas
(
,) to specify multiple channel group numbers. You can also specify one channel group
number. The range of permitted values for the channel group number is all the channel
group numbers set by the configuration command.
Example of a range specification that uses "
-" or ",":
1-3,5
The file names used on the RAMDISK or on the memory card
For details about the parameter range specifiable for each command, see the description
for each command or Specifiable values for parameters.
The following limitations exist for parameters outside the specifiable range for parameters:
 The file names are not case sensitive.
 A file name or a directory name ended with a period (
.) cannot be used.
The file names used on the FTP servers
For details about the parameter range specifiable for each command, see the description
for each command or Specifiable values for parameters.
Some server-dependent limitations other than the specifiable range for parameters might
exist. For details, see the specifications of the server.
When using the Switch as an FTP server, the descriptions in The file names used on the
RAMDISK or on the memory card above are applied.