Specifications

1 Reading the Manual
5
file extension.
(Example: xx
.dat, xx.txt)
If you do not use a file extension when specifying a file name, a command execution
error might occur.
#2: A forward slash is used as the path delimiter. A path name beginning with a forward
slash is not allowed.
Also, a path name meeting any of the following conditions is not allowed:
 The path name contains two successive periods (..).
 The path name contains a period (.). The only exception is a path name that
consists only of one period.
 The path name contains successive forward slashes.
(Example:
foo//baa)
 The path name ends with a forward slash.
(Example:
foo/)
#3: If the total number of characters in a directory name and its subordinate file name
exceeds 64 characters, the character string will not be displayed correctly by some
commands (for example,
show mc-file or show ramdisk-file).
Therefore, specify a directory name in which the total number of characters, including the
subordinate file name, does not exceed the maximum allowed number of characters. Keep
this in mind especially when using the
mkdir command to create a directory.
<IF#> Parameter range
Specify the <IF#> parameter in the format NIF-No./Port-No. (include the last period).
NIF-No. of the Switch is fixed at zero.
The following tables list the range of <IF#> values.
Table 1-3 Range of <IF#> values for AX2200S series switches
# Model Interface type Range of values
1 AX2230S-24T gigabitethernet 0/1 to 0/28
2 AX2230S-24P gigabitethernet 0/1 to 0/28
Table 1-4 Range of <IF#> values for AX1250S series switches
# Model Interface type Range of values
1 AX1250S-24T2C fastethernet 0/1 to 0/24
gigabitethernet 0/25 to 0/26
Table 1-5 Range of <IF#> values for AX1240S series switches
# Model Interface type Range of values
1 AX1240S-24T2C/AX1240S-24P2C fastethernet 0/1 to 0/24
gigabitethernet 0/25 to 0/26