Specifications

show channel-group statistics
197
Display items in Example 2
Table 14-6 Display items for the statistics for sent and received LACPDUs in link
aggregation
Item Meaning Displayed information
channel-group counts Number of channel groups to be
displayed
Number of channel groups
ChGr Channel group number Channel group number
Port Counts Number of ports to be displayed Number of ports
Port Interface port number --
TxLACPDUs Number of sent LACPDUs --
RxLACPDUs Number of received LACPDUs --
Tx MarkerResponsePDUs Number of sent marker response PDUs --
RxMarkerPDUs Number of received marker PDUs --
RxIllegals Number of discarded received PDUs Invalid PDUs
RxUnknowns Number of discarded received PDUs Unknown PDUs
Impact on communication
None
Response messages
Table 14-7 List of response messages for the show channel-group statistics command
Message Description
Can't execute. The command could not be executed. Re-execute the
command.
There is no information. ( channel-group
statistics )
There is no channel-group statistics information.
Notes
 Statistics are cleared when the device starts up or when the following commands are
executed:
Statistics for sent and received data packets:
clear counters
Information about sent and received LACPs:
clear channel-group statistics
lacp
 The statistics for the sent and received data packets displayed by this command are
the sum of the statistics on the Ethernet lines for each channel group. To clear the
statistics for sent and received data packets, use a command that clears Ethernet
lines. The following are related commands:
Related commands:
show interfaces