Specifications

show channel-group
185
Item Meaning Displayed information
defined for LACP.
Priority System priority Priority of the LACP system ID
1 to 65535 can be specified as the priority
value (1 indicates the highest priority).
MAC MAC address MAC address
Key Group key 0 to 65535
Port Information Information about the ports
managed by the channel group
is displayed.
--
<IF#>
Port number Number of the port whose information is to be
displayed
Up Link status of the port (up) --
Down Link status of the port (down) --
State Aggregation status of the port Detached: The port is reserved, a port
speed mismatch occurred, or half-duplex
mode is set.
Attached: The port is in a transition state or
is negotiating.
Collecting: The port is in a transition state
or is negotiating (data can be received).
Distributing: Data can be sent and
received.
If the status of the port is Down, Detached is
displayed.
Uplink redundant
#1
Displays uplink redundancy
information.
--
Startup active port selection Setting of the functionality that
permanently assigns the active
port at device startup
primary only: The functionality that
permanently assigns the active port at device
startup is enabled.
This item is displayed only when this
functionality is enabled.
Switchport
backup pairs
Primary The number of the primary port
or the channel group
If an asterisk (*) is displayed, the port is an
uplink port and the secondary port cannot be
used for communication because the
functionality that permanently assigns the
active port at device startup is enabled.
Status Status of the primary port Forwarding: Forwarding
Blocking: Blocking
Down: Link down
Secondary The number of the secondary
port or the channel group
--