Specifications

show power inline [AX2200S][AX1240S]
177
Item Meaning Displayed information
-
4
: Power class Class 4 (30.0 W), which conforms to IEEE
802.3at
If manual setting is performed:
- manual: The amount of power supplied is assigned
manually.
-: Disabled
Alloc(mW) Assigned power The power assigned to each port
Power(mW) Power consumption The power consumed by each port
Vol(V) Voltage The voltage used by each port
Cur(mA) Current The current used by each port
Description Port name Displays the contents of the Description configuration.
Impact on communication
None
Response messages
Table 13-16 List of response messages for the show power inline command
Message Description
Can't execute. The command could not be executed. Re-execute the
command.
This model does not support PoE. The model does not support PoE.
There is no information.( power inline ) The specified information does not exist.
Notes
 Values displayed for Total Allocate and Power for each port
For
Power, information is collected port by port, resulting in a time lag in the
collection of data for port 1 and port 24. Therefore, if the power to the ports varies,
the total power displayed for
Power might exceed 370 W. (The Total Allocate
value does not have this problem. Also, there is no problem with the priority setting
because it is based on the values in
Total Allocate.)
 There will be a small amount of time before the execution result of the command is
displayed.
 Each power is actually assigned slightly more than the shown value. Therefore, the
actual power consumption might exceed the assigned power in the display.
[AX2200S]