Specifications

show power inline [AX2200S][AX1240S]
176
Item Meaning Displayed information
- Threshold value
Total Power(W) Total power for the entire
device
Displays the total power for the entire device to
the tenths place.
Priority Control Status of priority setting for
supplying power to the device
enable: Enabled
disable: Disabled
Table 13-15 Display of the PoE information for ports
Item Meaning Displayed information
Port Counts Number of ports Displays the total number of the ports that meet the
conditions.
Port Port Interface port number
Status Power supply status Displays the PoE status of a port.
on: Power is being supplied.
off: Power is not being supplied.
faulty: Power cannot be supplied to the connected
device.
denied: Power is not being supplied because there is not
enough power.
inact: The supply of power has been stopped by an
operation command.
Priority Priority for supplying
power
If the port priority setting is enabled:
- critical: Power is guaranteed because the port has
the greatest importance.
- high: The priority for supplying power is high.
- low: The priority for supplying power is low.
If the port priority setting is disabled:
- -: Power is supplied.
never: The PoE functionality is disabled regardless of the
port priority setting.
Class Power class If class-based setting is performed:
- 0: Power class Class 0 (15.4 W), which conforms to IEEE
802.3af
- 1: Power class Class 1 (4.0 W), which conforms to IEEE
802.3af
- 2: Power class Class 2 (7.0 W), which conforms to IEEE
802.3af
- 3: Power class Class 3 (15.4 W), which conforms to IEEE
802.3af