Specifications

inactivate
169
inactivate
Returns the status of the Ethernet interface to inactive from active without changing the
startup configuration file stored in internal flash memory.
Syntax
inactivate gigabitethernet <IF#> [AX2200S]
inactivate {fastethernet <IF#> | gigabitethernet <IF#>} [AX1250S] [AX1240S]
Input mode
User mode and administrator mode
Parameters
gigabitethernet [AX2200S]
Specifies a 10BASE-T/100BASE-TX/1000BASE-T or 1000BASE-X interface.
{fastethernet <IF#> | gigabitethernet <IF#>} [AX1250S][AX1240S]
fastethernet
Specify a 10BASE-T or 100BASE-TX interface.
gigabitethernet
Specify a 1000BASE-T, 100BASE-FX, or 1000BASE-X interface.
<IF#>
Specify an interface port number. For the specifiable range of values, see Specifiable
values for parameters.
Example
Return the status of interface port 0/1 to inactive.
> inactivate fastethernet 0/1
Display items
None
Impact on communication
Yes
Response messages
Table 13-11 List of response messages for the inactivate command
Message Description
<IF#> is already inactive.
The specified port is already inactive. The command
does not need to be executed if you correctly specified
the port.
<IF#>:Interface port number
<IF#> is disabled.
The specified port is in disable status due to the
configuration. Make sure the specified parameter is
correct, and then try again.
<IF#>:Interface port number
Can't execute. The command could not be executed. Re-execute the