Specifications

clear counters
156
clear counters
Clears the statistics counter of an Ethernet interface to zero.
Syntax
clear counters [ gigabitethernet <IF#> ] [AX2200S]
clear counters [{fastethernet <IF#> | gigabitethernet <IF#>}] [AX1250S] [AX1240S]
Input mode
User mode and administrator mode
Parameters
gigabitethernet [AX2200S]
Specifies a 10BASE-T/100BASE-TX/1000BASE-T or 1000BASE-X interface.
{fastethernet <IF#> | gigabitethernet <IF#>} [AX1250S][AX1240S]
fastethernet
Specify a 10BASE-T or 100BASE-TX interface.
gigabitethernet
Specify a 1000BASE-T, 100BASE-FX, or 1000BASE-X interface.
<IF#>
Specify an interface port number. For the specifiable range of values, see
Specifiable values for parameters.
Operation when all parameters are omitted:
Clears the statistics counter of all Ethernet interfaces to zero.
Example
None
Display items
None
Impact on communication
None
Response messages
None
Notes
 Even if the statistics counter is cleared to zero, the value of the MIB information
obtained by using SNMP is not cleared to zero.
 The following information items displayed by the
show interfaces command are
cleared to zero:
 Send and receive statistics
 Send error statistics
 Receive error statistics
 Failure statistics
 The
clear counters command also clears the port's statistics counter displayed by